PRO1000 sheet metal finishing
Finish cut parts before they slow down the shop.
Deburr, edge-round, and surface-finish laser-cut parts in one controlled pass, with Kilroy support from application review through operator training.
- U.S. delivery coordination
- Installation support
- Operator training
One machine, three outcomes
Production-ready parts with less handling.
Deburr
Wide abrasive belts remove burrs, dross, and surface defects across the working width.
Edge round
Planetary brushes reach part contours and break sharp edges from multiple directions.
Finish
Repeatable settings create a consistent surface that is easier to inspect and reproduce.
See the finishing cell
Watch PRO1000 in production.
See the material flow, working head, and finished-part handling before planning a sample test.
Right-sized specification
The numbers that matter for shop planning.
Electrical service, dust extraction, tooling, and finish targets are confirmed against your parts before quoting.
- Working width
- 1000 mm
- Part thickness
- 0.8-80 mm
- Feed speed
- 0.5-6 m/min
- Minimum part*
- 50 x 50 mm
- Hold-down
- Magnetic + vacuum
- Controls
- 10 in Siemens PLC
- Machine size
- 3860 x 1830 x 2250 mm
- Approx. weight
- 3950 kg
* Minimum size is based on solid plate without holes. Final configuration is application-dependent and subject to technical confirmation.
From purchase order to production
Kilroy stays with the project.
Application review
Parts, burr type, finish target, throughput, and tooling.
Delivery planning
Site readiness, utilities, access, and installation timing.
Commissioning
Machine setup and process confirmation using your work.
Training
Recipes, daily operation, maintenance, and safe use.
Make the finish visible
Send us the part slowing your shop down.
Share a drawing, photo, or sample plus the material, thickness, burr type, and target finish. Kilroy will recommend a process and plan a sample test.